Wiki » Historie » Revision 3
Revision 2 (Maximilian Seesslen, 12.11.2026 11:29) → Revision 3/5 (Maximilian Seesslen, 12.11.2026 11:44)
h1. Wiki
* 2xCAN
* 2xUART
* Connect DAC to ADC.
* 2 further ADC inputs with different resistor dividers.
* Can even test debouncing; PWM to GPIO Input
* Test slope counter, Hz etc.
* Program internal flash
* Verify CRC calculation
* Any present SPI flash
* Any present I2C flash
* Compare systimer with RTC
* Test some patterns in UID
* UCPD test platform
Cheapest would be:
* STM32G0B1CBU6; UFQFPN48; 128 Kbytes flash; 2048 erase page
Connections:
* Debug
* USB-C; FRSTX, CC1, CC2 (Fast Role Swap Transmit)
* PWM-LED + 5V output like CANIO
* I2C like CANIO
* CAN-Bus
* 2xCAN
* 2xUART
* Connect DAC to ADC.
* 2 further ADC inputs with different resistor dividers.
* Can even test debouncing; PWM to GPIO Input
* Test slope counter, Hz etc.
* Program internal flash
* Verify CRC calculation
* Any present SPI flash
* Any present I2C flash
* Compare systimer with RTC
* Test some patterns in UID
* UCPD test platform
Cheapest would be:
* STM32G0B1CBU6; UFQFPN48; 128 Kbytes flash; 2048 erase page
Connections:
* Debug
* USB-C; FRSTX, CC1, CC2 (Fast Role Swap Transmit)
* PWM-LED + 5V output like CANIO
* I2C like CANIO
* CAN-Bus