Redmine

16.01.2022

17:04 Biwak Revision 22c4683e (libbiwak3): bring stm32f0 to life again

Redmine Admin

13.01.2022

15:30 Hardware Unterstützung #135 (Neu): Create BOM creator script with warehouse fields

Quite easy;... Redmine Admin

11.01.2022

00:07 Biwak Revision e98aa372 (libbiwak3): biwakInit: low poer mode only for stm32l0

Redmine Admin

10.01.2022

17:50 miniminutnik Feature #133 (Erledigt): implement corona mode again

The guideline changed.
Now the fentilation is every 20 minutes for 3 minutes.
The mode has only to be supported on ... Redmine Admin

16:17 miniminutnik Feature #132 (Abgewiesen): Lower down CPU speed

Also show CPU speed at startup.
This is more important than "Oh Tannenbaum".
Redmine Admin

16:15 miniminutnik Fehler #115: LEDs stay on some times

Check IRQ-Routine that biwak-interrupt is called before HAL-Handler.
Redmine Admin

09.01.2022

15:43 miniminutnik Feature #129 (Erledigt): Firmware for different MCUs

Maximilian Seesslen

15:41 miniminutnik Fehler #115: LEDs stay on some times

Only happens when voltage is very low.
Maximilian Seesslen

14:52 Biwak Revision 4268a1f0 (libbiwak3): cleanup

Redmine Admin

07:31 Miniminutnik Feature #114 (Erledigt): Device must run with 2Volts

Maximilian Seesslen

07:25 Miniminutnik Feature #114: Device must run with 2Volts

Solved by replacing blueish LEDs and MOSFETs. Maximilian Seesslen

07:05 Miniminutnik Fehler #110 (Erledigt): Replace buzzer

Solution: use other NMOS Maximilian Seesslen